PeriNet analyser modules

INOVA PeriNet offers a broad product portfolio of autonomous analyser modules. In combination with the VibraTek linear sensor, they provide a safe and effective solution for the detection of break-in and climb over attempts of all common perimeter protection constructions.

Perimeter protection of the latest generation

INOVA PeriNet analyser modules combined with the VibraTek linear sensor enable a reliable and accurate localization of an attack within a monitored perimeter in real time. By linking several analyser modules, monitored perimeters can be extended as required.

  • Highlights
    • Unambiguous alarm assignment through physical division of the perimeter into alarm zones
    • Individual detection parameters can be defined for each detection zone ...
    • ... which allows an optimal adaptation of the detection to different fence and gate types
    • The analyser modules are installed centrally (e.g. in the technical room) or decentrally (e.g. on the fence construction) 
    • Permanent sabotage monitoring of all PeriNet system components
  • Comparison of technical data
     

    Inputs

    Interfaces
    Outputs
    Add-on module
    (optional)
    Ext.module (optional)
    Maximum load of the relay contacts

    Operating temperature range

    Enclosure
    Sealing
    Cable glands
    Cable gland dealing
    Dimensions
    Weight
    VibraSectorUnoTekDuoTekMikroTek
    Sensor cable (2x) voltage range 9-24V
    external contacts (4x)
    sensor cabel
    voltage range 9-24V
    external contacts(2x)
    sensor cabel (2x)
    voltage range 9-24V
      external contavts (4x)
    sensor cabel
    voltage range 9-24V
    RJ45 Ethernet USBUSB-
    general alarm sabotage audio TCP/IP Status (2x)alarm
    sabotage
    audio
    alarm (2x)
    sabotage (2x)
    audio
    alarm
    sabotage
    10 relay- contact outputs

    -

    -

    -
    up to 100- contact-outputs

    -

    -

    -
    voltage:
    350V AC
    350V DC
    current:
    120mA AC

    voltage:
    120V AC
    24V DC
    current:
    500mA AC
    150mA DC

    voltage:
    120V AC
    24V DC
    current:
    500mA AC
    50mA DC

    voltage:
    350V AC
    350V DC
    current:
    120mA AC

    -40°C to
    +70°C
    -30°C bis
    +70°C
    -30°C to
    +70°C
    -30°C bis
    +70°C
    pressure die-cast aluminiumpressure die-cast aluminiumpressure die-cast aluminiumpressure die-cast aluminium
    IP-65
    IP-65
    IP-65
    IP-65
    3xM20, Ø8-13mm
    2xPG, Ø4-8mm
    2xM20, Ø8-13mm
    2xPG, Ø4-8mm
    2xM20, Ø8-13mm
    2xPG, Ø4-8mm
    1xM20, Ø8-13mm
    1xPG, Ø4-8mm
    IP-66
    IP-66
    IP-66
    IP-66
    260x160x90mm260x160x90mm260x160x90mm122x122x80mm
    1,8kgs1,8kgs1,8kgs1,1kgs
  • Comparison of performance characteristics
     
     
    Sensor type
    number of alarm zones
    Max. range*
    Configuration and parameterization
    Integration of external contacts
    Outputs via potential-free contacts
    External relay module
    Network compability

    audio output

    LED status display

    LCD display

    * depending on the type of perimeter structure

    VibraSectorUnoTekDuoTekMikroTek
    VibraTek 3G VSVibraTek 3GVibraTek 3GVibraTek 3G
    up to 100 121
    uo to 1.000mup tu 300mup to 600mup to 300m
    software-based via ethernetsoftware­based via USBsoftware­-based via USBvia rotary knobs
    424-
    10xalarm (optional) generalalarm Sabotage TCP/IP-alarm ext. Relais­modul-alarmalarm
    sabotage
    2xalarm
    2xsabotage

    alarm
    sabotage

    optional---
    UDP-protokoll
    TCP/IP-protokoll
    ---
    yesyesyes-
    yesyesyes-
    yes---
        
        

     


detected fence
detected fence

Auswerter INOVA PeriNet von Berlemann Torbau GmbH
Bildergalerie: PeriNet Detection systems
r MicroTek & UnoTek
Auswerter INOVA PeriNet von Berlemann Torbau GmbH

The MicroTek and UnoTek single-zone detect up to 300m of fence.

Bild 1 von 4
DuoTek
Auswerter INOVA PeriNet von Berlemann Torbau GmbH

The DuoTek analyser provides two zones of intrusion detection and can detect up to 600m of fence. Each sub-zone can be allocated its own set of detection parameters. This is advantageous if the zones have variations in fence quality or are subject to different environmental influences.

Bild 2 von 4
r VibraSector - ring-configuration
Ringkonfiguration INOVA PeriNet von Berlemann Torbau GmbH

The VibraSector analyser has been specifially designed for large objects with up to 1,000m fence. The detection length may be segmented into up to 100 sub-zones. Each VibraSector sub-zone can be allocated its own set of detection parameters. Non-sensitive sections that do not require monitoring can be quickly and easily integrated into the detection length.

Bild 3 von 4
VibraSector - line configuration
Linienkonfiguration INOVA PeriNet von Berlemann Torbau GmbH

A special feature of the VibraSector analyser is the unlimited scalability of the system. For large perimeters with more than 1,000m structure to be detected multiple analyzers can be connected. This makes the VibraSector system future proof, e.g. in case of subsequent property extensions.

Bild 4 von 4

Functional principle and architecture

A PeriNet detection system consists of at least one analyser module and a VibraTek linear sensor mounted along the fence structure to be monitored. The analyser module processes the signals recorded via the sensor cable and distinguishes between normal environmental influences (wind, rain, snow) and intrusion attempts. Depending on the protection requirements of the object, the fence construction to be monitored is physically subdivided into individual alarm zones by means of segmentation modules.

Support of all common fence types

PeriNet detection systems enable the electronic protection of various types of fence constructions. The individual length of a reporting zone is arbitrary up to the maximum possible length. The maximum length of a detection zone depends on the type of fence construction. The zone lengths listed in the table are plan values which may vary depending on the quality of the fence material and the installation.

Fence typeZone length
Wire mesh (plastic coated)150 m
Welded mesh (galvanized)200 m
Welded mesh275 m
Expanded metal275 m
Front grid/palisade300 m

Transmission of alarm information

PeriNet analyser modules offer extensive options to integrate alarm messages easily and effortlessly into a superior alarm management or alarm visualization system. Regardless of the type of PeriNet analyser, it is always possible to transmit alarms via relay contact outputs.

The VibraSector analyser also offers the option of passing on alarm and status information via network. In addition to forwarding the alarm via TCP/IP, a complete integration into a higher-level alarm management system is also possible. Thus, in addition to the alarm processing, it is also possible to configure the VibraSector analyser via the alarm management system.

 

Your Contact Person

Christian Wald
Tel.: +49 163 4948-114
Fax: +49 5973 ­9481-50
EMail:

UnoTek
DuoTek
VibraSector

More images in our Downloadcenter»